Skip to content

Solar Power (PV)

Solar Power, Sized Before It Is Sold.

Rooftop photovoltaic systems for selected villas, residential buildings and commercial premises, sized to what the building actually uses and specified as one system.

Solar Power (PV)

Why We Work This Way

A solar power system is easy to sell by the panel and harder to get right. It pays back only when it is sized against what the building really consumes, on a roof that can carry it and faces the right way.

So we start from the load, not from a package. Alongside solar water heating, we provide photovoltaic (PV) systems for selected projects through alliances with established partners. Eng. Mohammed Taha, our technical principal, sizes and specifies each system; it is sourced through our partners and installed by qualified installers, with us on the technical side through commissioning.

If the roof, the load or the tariff does not justify a PV system, we will say so before you spend. The same rule applies to every system we supply.

Key Benefits

  • Sized to real consumption: from the building's own electricity use and the roof it has, not from a standard package
  • Specified as one system: panels, inverters and mounting chosen together, so each part matches the others
  • An engineer's specification: by Eng. Mohammed Taha, a mechanical engineer with 25 years of experience
  • Planned with the rest of the building: worked out alongside solar water heating, heat pumps and air-conditioning, on the same roof and against the same loads
  • Technical support through commissioning: installed by qualified installers, with us on the technical side until the system is running

Who This Is For

  • Villa and home owners who want a system sized to their own consumption rather than to a package
  • Owners of residential buildings and commercial premises planning a rooftop system
  • Developers, architects and consultants who want solar power specified alongside the building's heating, cooling and hot water
  • Projects already working with us on other systems that want one technical point of contact

Solar power and solar water heating are different systems that share a roof. A solar water heater is usually the first system we put on a roof: it moves the hot-water load to the sun at the lowest cost. PV then covers the electrical load that remains, including heat pumps and air-conditioning. We size both on the same roof.

The sizing starts from the building's electricity consumption across the year and from what the roof allows: usable area, orientation, shading and structure. Panels, inverters and mounting are then specified together as one system.

Send us a recent electricity bill and a photograph or drawing of the roof. That is enough for a first answer on whether a system is worth pursuing and roughly what size it would be, at no charge.

Technical Specifications

Feature Specification
System types Grid-connected rooftop systems for villas, apartment buildings and commercial premises
Sizing basis Annual electricity consumption, usable roof area, orientation and shading
Specification Panels, inverters and mounting specified as one system
Supply and installation Sourced through established partners and installed by qualified installers
Integration Combined with heat pumps or solar water heating where the building's energy balance justifies it
Our role Sizing, specification and technical support through commissioning